StoppingPower.net Forums
Home
Forums
Commentary
H&S
About
StoppingPower.net Forums

StoppingPower.net Forums - .45 GAP in Revolvers
StoppingPower.net Forums
StoppingPower.net Forums
Forums Home | Profile | Register | Active Topics | Members | Search | FAQ | Invite a friend
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 Shooting
 Wheelgun Chronicles
 .45 GAP in Revolvers
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

CW2 Ralph Long
Average Member

USA
421 Posts

Posted - July 17 2021 :  10:20:07 PM  Show Profile  Click to see CW2 Ralph Long's MSN Messenger address  Reply with Quote
I found a bunch of .45 GAP 200 grain Gold Dot at an LE supplier at a very good price. After doing some digging through safety and feasibility issues on the S&W Forum, I decided to try some of the GAP ammunition in my S&W 22-4 4". .45 GAP has a chamber pressure similar to .45 ACP (+p). I used the same moon clips that I use with ..45 ACP. The round chronographed with an average velocity of 966 fps; the slowest was 933 fps. The average is just 4 fps slower than advertised by Speer. The 200 grain Lawman practice load was actually achieved a faster average than the Gold Dot. The recoil was very similar to that of the 185 grain Remington Golden Saber std pressure in the same revolver. When fired the GAP through my "hillbilly" clothing barrier of overalls, sweat shirt and T-shirt into water filled milk jugs, I got an expansion of .75 caliber. So in a pinch, it'll do.

“If you will not fight for right when you can easily win without bloodshed;
if you will not fight when your victory is sure and not too costly; you may
come to the moment when you will have to fight with all the odds against you and only a precarious chance of survival. There may even be a worse case. You may have to fight when there is no hope of victory, because it is better to perish than to live as slaves.”

Winston Churchill
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
StoppingPower.net Forums © 2002-16 StoppingPower.net, Inc. Go To Top Of Page
Thispagewasgeneratedin0.06seconds. Snitz Forums 2000